| Vickers is a reconginsed leader, providing International markets with advanced technology fluid power and motion control components, packages and systems. |
| |
|
| Hydraulic and Lubrication Filters. |
| Filter from INTERNORMEN-Filter can be used for mineral oils, emulsions and for most synthetic Hydraulic fluids and lubrication oils. |
|
|
 |
|
| PRESSURE CONTROLS |
| » |
Pressure Relief Valves. |
| » |
Pressure Reducing Valves. |
| » |
Electrically Operated Relief Valves. |
| » |
Unloading Relief Valves. |
| » |
Sequence, unloading & Back Pressure Valves. |
|
|
 |
|
| |
|
| |
|
| Tank Mounted Return-Line Filters |
| |
|
 |
 |
|
| Tank Mounted Return-Line Filters |
| |
|
 |
 |
|
|
| |
|
| |
|
| Pressure Filters |
| |
|
 |
 |
|
Pressure Filters, change - over |
| |
|
 |
 |
|
| |
|
| |
|
| Pressure Filters |
| |
|
 |
 |
|
| Pressure Filters PN > 100 |
| |
|
 |
 |
|
| |
|
| |
|
| Pressure Filters, flangeable PN > 100 |
| |
|
 |
 |
|
| Stainless Steel Filters - Offline Filters |
| |
|
 |
 |
|
| |
|
| |
|
| Tank mounted suction filter |
| |
|
 |
 |
|
| Tank Breather |
| |
|
 |
 |
|
| |
|
| |
|
| Spin On Filters |
| |
|
 |
 |
|
| Offline Filter unit - Oil service equipment |
| |
|
|
 |
|
| |
|
| |
|
| Filter Media: |
| |
|
| INTERNORMEN-FILTER = High Quality Standard. |
| The filter material used in the elements is supported by combining a special fibre material and stainless steel wire, which stops damage to the fibre during production and filtration at high pressure difference. Other filtration rates, which are not mentioned in this brochure, can be obtained on request. |
|
|
|
| Mainly used filter material: |
| Interpr Fleece "VG" Glass Fibre |
| » |
deep filtration |
| » |
high particle-holding capacity |
| » |
usable for water glycol, phosphate ester fluids |
| » |
available 1 µm, 3 µm, 6 µm, 10 µm, 16 µm and 25 µm. |
|
|
 |
|
| |
|
| Paper Matting "P" |
| » |
deep filtration |
| » |
paper matting consists of paper and polyester fibre |
| » |
higher material stability and strength |
| » |
low swelling reaction |
| » |
available in 10 µm and 25 µm |
|
|
 |
|
| Stainless Steel Mesh "G" |
| » |
surface holding filtration |
| » |
stainless steel wire mesh can be used on corrosive liquids |
| » |
difficult to clean |
| » |
available 25 µm, 40 µm and 80 µm, other µm rating on request. |
|
|
 |
|
| |
|
| International Standards manufacturing and quality control. |
| In addition to tests developed by INTERNORMEN -FILTER, testing to the following ISO-Standards is done: |
ISO 2941 Verification of collapse/burst resistance
ISO 2942 Verification of fabrication integrity
ISO 2943 Verification of material compatibility with fluids.
ISO 3723 Method for end load testing.
ISO 3724 Verification of flow fatigue characteristics
ISO 3968 Evaluation of pressure drop versus flow characteristics
ISO 4572 Multi-Pass methods for evaluating filtration performance. |
| |
|
 |
 |
 |
|
